SUPER WASHABLE MATTE WHITE PAINT FORTIFIED WITH PORCELAIN PARTICLES KRAFT KRAFT INTERIOR GLOSS / 0.75L
Description
MATT WHITE SUPER WASHABLE PAINT FORTIFIED WITH PORCELAIN PARTICLES KRAFT KRAFT GLOSS INTERIOR / 0.75L
Advantages
- Resistant over time thanks to porcelain particles.
- Super white.
- Super coverage.
Product Information
Colours:White
Packaging: 0,75L, 2,5L, 4L, 8,5L, 15L, 45Kg
Technical Information
Application tools
Used for finishing new or old interior surfaces (walls, ceilings) of plasterboard, plaster, concrete, cement or wood. Recommended for effective anti-microbial protection in areas with high hygiene standards: hospitals, clinics and doctor's surgeries, maternity wards, schools, kindergartens, restaurants, kitchens, bathrooms, etc. or for any other rooms that are subject to frequent decontamination and frequent washing with disinfectant.
Masks small surface finish imperfections
Matt film with very good covering power
How to use
The surface to which it is to be applied must be solid, dry, clean, free from dust, grease, salts, rust, old degraded paints or other impurities that may prevent adhesion.
- Degraded surfaces (showing cracks, cracks, holes, etc.) are repaired:
- Cracks - with KRAFT Repair. After drying, sand the area, sand and apply one coat of KRAFT Wall Primer in the appropriate dilution or one coat of KRAFT White Primer.
- Cracks - repair with filler putty. After drying, sand the area and sand it dry. Finish with KRAFT Repair, sand again, then apply KRAFT Wall Primer in the appropriate dilution or a coat of KRAFT White Primer.
- Previously painted, untreated surfaces - Wash with detergent solution (if necessary) and prime with KRAFT Wall Primer or KRAFT White Primer. If the surfaces are load-bearing with no peeling or blistering, proceed directly to KRAFT Brilliant Interior White.
- New surfaces - prime with KRAFT Wall Primer. New concrete, plaster or cement surfaces should be primed and painted a minimum of 30 days after installation.
- Surfaces with mould spots: completely remove the mould layer and treat the surface with anti-mold solution. After 24 hours, clean with a clean brush and prime with KRAFT Wall Primer or KRAFT White Primer diluted appropriately.
- Stained or smoke-stained surfaces should be primed with KRAFT Stain Blocker Aqua; after 24 hours, paint can be applied.
- For effective priming, a small area of the surface should be tested for absorption. The applied primer must not form a glossy film after drying.
- Apply 2 coats on the properly prepared surface.
- Adjust viscosity (thinning) for roller or brush application with clean water in the following proportions:
- For the first coat: max 10 %
- For the second coat: max 5 % or do not dilute
- Tools: brush, roller, air or airless spray gun. For air or airless spray guns, the spray angle, nozzle, spray pressure and dilution of the paint must be chosen according to the type of machine, after trials on a small surface.
- Shallow drying time: 1 - 2 hours (at 25°C and 65% relative humidity). Drying time increases with decreasing temperature and increasing humidity.
- Clean the tools with water immediately after use.
- Spray device nozzles must be cleaned when work is interrupted for more than 10 minutes to prevent clogging.
- The surface is washable 28 days after application.
Details
Contact
Call now for any questions or to order:
+40769088858
+40769088860
+40769088861
+40769088862
Delivery
Offer
You want a lower price, you can't find what you are looking for, ask for an offer by email to: vanzari@pdet.ro