KRAFT SUPER WASHABLE PAINT FOR INTERIOR EXTREMELY MATT WHITE KRAFT ABSOLUTE MATT / 0.75L
RON 31.03
(VAT included)
shipping cost is not included
How can we help?
Description
KRAFT SUPER WASHABLE INTERIOR PAINT EXTREMELY MATT WHITE KRAFT ABSOLUTE MATT / 0.75L
Premium washable paint based on modified latex acrylic resins, for walls and ceilings, with extra covering power and high whiteness. It forms a super matt film to mask minor finishing imperfections in the substrate. It has good workability with no splattering effects.
Advantages
- The finish retains its appearance over time.
- Masks wall finish imperfections.
- Retains its appearance after repeated washing.
Product Information
Shades: White
Packaging: 0,75L, 2,5L, 4L, 8,5L, 15L, 45Kg
Technical Data
DILUTION: 5-10%
YIELD: 13-15m2/L/coat
SURFACE DRYING: 1-2 hours
Application tools
ROLLER
TAMP
AIRLESS PAINTING PUMP
General information
It is used for the protection and decorative finishing of new or old interior surfaces (walls, ceilings) made of plasterboard, plaster, concrete, cement or wood.
How to use
Surface preparation
- The surface to which it is to be applied must be solid, dry, clean, free from dust, grease, salts, rust, old, degraded paints or other impurities that may prevent adhesion.
- Degraded surfaces (showing cracks, cracks, holes, etc.) are repaired:
- Cracks - with KRAFT Repair. After drying, sand the area, sand and apply one coat of KRAFT Wall Primer in the appropriate dilution or one coat of KRAFT White Primer.
- Cracks - repair with filler putty. After drying, sand the area and sand it dry. Finish with KRAFT Repair, sand again, then apply KRAFT Wall Primer in the appropriate dilution or a coat of KRAFT White Primer.
- Previously painted, untreated surfaces - Wash with detergent solution (if necessary) and prime with KRAFT Wall Primer or KRAFT White Primer. If the surfaces are load-bearing with no peeling or blistering, proceed directly to KRAFT Absolut Mat.
- New surfaces - prime with KRAFT Wall Primer. New concrete, plaster or cement surfaces should be primed and painted a minimum of 28 days after installation.
- Surfaces with mould stains: completely remove the mould layer and treat the surface with anti-mold solution. After 24 hours, clean with a clean brush and prime with KRAFT Wall Primer or KRAFT White Primer diluted appropriately.
- Stained or cigarette smoke affected surfaces are primed with KRAFT Stain Blocking Primer; after 24 hours the paint can be applied.
Application instructions
- Apply 2 coats to the properly prepared surface.
- The first coat can be thinned with max. 10% water if the wall is primed with KRAFT Wall Primer. In case of priming with KRAFT White Primer, a single coat of KRAFT Absolut Mat diluted max. 5% or undiluted.
Instructions after use
- Clean the tools with water immediately after use.
- Spray device nozzles must be cleaned when work is interrupted for more than 10 minutes to prevent clogging.
- Surface can be washed 28 days after application.
Details
Contact
Call now for any questions or to order:
+40769088858
+40769088860
+40769088861
+40769088862
Delivery
Delivery of orders
The ordered products are delivered using the delivery method and term chosen by you when placing your order. Products are in the original, sealed packaging of the manufacturer and are insured throughout the transport until delivery.
Deliveries are made by PDET's own vans and by specialised cargo courier companies.
Deliveries are from Monday to Friday between 08:00 - 17:00. For deliveries outside these hours, please contact the sales agent.
Offer
You want a lower price, you can't find what you are looking for, ask for an offer by email to: vanzari@pdet.ro
What customers are saying
Do you own or have used the product?
Post review