KRAFT PERFECT HIGH YIELD WHITE WASHABLE PAINT / 15L

To ensure good adhesion, the surface must be solid, dry, clean and free from dust, grease, grease, salts, rust, residues, degraded paint or other impurities that may prevent adhesion.

• On new surfaces: Before painting, apply one coat of KRAFT WALL PRIMER or KRAFT COMFORT WALL PRIMER, suitably diluted, or one coat of KRAFT WHITE PRIMER. After 24 hours, apply 2 coats of KRAFT Perfect. New concrete, plaster or cement surfaces should be primed and painted a minimum of 30 days after installation.
• On surfaces in need of repair (cracks/cracks): Use KRAFT REPAIR for cracks and KRAFT PUTTY for cracks. After drying, sand the area, dust and apply one coat of suitably thinned KRAFT WALL PRIMER or one coat of KRAFT COMFORT WALL PRIMER or, for dirty surfaces, one coat of KRAFT WHITE PRIMER.
• Previously painted, untreated surfaces: Wash the surfaces with detergent solution (if necessary) and prime with KRAFT WALL PRIMER or KRAFT COMFORT WALL PRIMER or, for dirty surfaces, prime with KRAFT WHITE PRIMER. If the surfaces are load-bearing, with no peeling or blistering, KRAFT Perfect can be applied directly.
• Stained or cigarette smoke affected surfaces: Prime with KRAFT STAIN BLOCKER AQUA (water based) or KRAFT STAIN BLOCKER solvent based; after 24 hours, the paint can be applied.
• On surfaces with mould stains: Completely remove the mould layer and treat the surface with KRAFT Brilliant Anti-Mold Deep Solution. After 24 hours, clean with a clean brush and prime with KRAFT WALL PRIMER.