Brikston Bks 11.5 / 1.42 M3

Delivery by pallet only.

Buc/m3 of masonry: 70
Buc/pallet: 100

Pallet: 1.42 MC Masonry

Brikston BKS BKS 11.5 (500x115x238)

Bricks with vertical voids, used for masonry with non-structural walls (partition walls, enclosing walls), framed walls in framed constructions with a thickness of 12.5 cm.
They are to be applied together with general purpose mortar (cement-sand-sand) or ready-mixed mortars for masonry with a minimum M2.5.
The masonry will be protected against the action of water by plastering.

Areas of use:

- 12.5 cm thick partition walls;
- Easier to install than similar products with similar nut and styrene, due to its low mass;
- 50% higher compressive strength than required by law for partition walls.

Dimensions - Length (mm): 500
Dimensions - Width (mm): 115
Dimensions - Thickness (mm): 238
Compressive strength (N/mmp): 7.5
Bearing capacity: NO
Mass (kg): 10,5
Consumption per square metre (pcs) wall: 11.5 cm: 8
Apparent density (kg/mc): 800
Reaction to fire: Euroclass A1
Fire resistance 37.5 cm wall: REI 60
Water absorption: 15%
Mortar consumption per cubic cubic metre of masonry (litres): 48
Equivalence (CN): 7,87
Design compressive strength of masonry (with M5 mortar): 1,74
Design compressive strength of masonry (with M10 mortar): 2,14